Purchase these Items

Products mentioned in this Article

--None--
 

 

Tiger I E Platoon (Plastic) (GBX90)

Tiger I E Platoon (GBX90)

Tiger I E Platoon (GBX90)
includes five plastic Tiger I E sprues, one plastic Tank Commander sprue, two printed objective markers, nine TANKS cards & two Decal sheets.

When the Tiger was introduced in 1942 it was a weapon unequalled in performance and protection, there was little the Allies in the Tunisia or Russia could do to knock them out. It had its disadvantages (it was slow and a little unreliable to start with), but at the time its clear advantages outweighed these.

This product is no longer currently available for sale...

Tiger I E Platoon (GBX90)
Read Chris' Five Reasons Why I Love The Plastic Tiger here...
The Tiger first underwent development when specifications for a new heavy tank were sent out to various manufacturers. It was to mount a gun that penetrated 100mm of armour at a 1500m and also be able to withstand return fire from similar weapons. Henschel developed the VK3601, but this design was to have a squeeze bore weapon, which had to be abandoned due to the lack of an adequate supply of tungsten for the ammunition. The VK3601 was quickly adapted to mount the 8.8cm KwK36 gun, which had already made itself famous in the anti-tank role as the FlaK36. 

The new prototype became the VK4501 (H), the (H) to distinguish it from the parallel development of Porsche VK4501 (P) (which later became the Ferdinand).
The Plastic Tiger I E Sprue
Tiger I E Platoon (GBX90)
While Stocks Last!
Tigers Marsch Edition Bonus Content Inside
If you see this sticker (see the example on the right) on the new plastic Tiger I E Platoon box set then it contains the limited edition Tigers Marsch content. The bonus contain includes two printed objectives featuring artwork by Vincent Wai of the iconic Tiger I E in action; one 101. Schwere SS-Panerabteilung decal sheet and seven cards for the World War Two tank skirmish game, TANKS.

Stock is strictly limited so act now to avoid disappointment.
Tigers Marsch Edition Bonus Content Inside! 
The order to start the final design was issued on 26 May 1941. Henschel was to develop the chassis while Krupp developed the turret. Porsche’s version was also still under development and Krupp was also to provide the turret for this. Rheinmetall also developed a turret mounting the 7.5cm KwK L/70 gun (later to become famous as the Panther’s gun) but this was abandoned in favour of the 8.8cm mounts.  
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
The Tiger I E in Flames Of War  
      Armour 
   
Name 
Mobility 
Front 
Side 
Top 
Equipment and Notes 
Weapon 
Range 
ROF 
Anti-tank 
Firepower 
 
Tiger I E Slow Tank 9 8 2 Co-ax MG, Hull MG, Protected ammo, Wide tracks.
8.8cm KwK36 gun
40"/100cm
2
13
3+ 
Slow traverse.
Production of the Tiger I E began in July 1942. Production of the Porsche model was abandoned after problems with the engines and suspension and only five tanks were completed. The Henschel model now became the sole Tiger in production. The target was to produce 285 by 12 May 1943 in time for the summer offensive.  
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)

Protected Ammo
Many tanks are destroyed not by the enemy shell but by their own ammunition being hit by white-hot fragments of armour and exploding. The chances of this were minimised by providing a safe place for stowing ammunition within the vehicle such as an armoured compartment or inside a water-filled jacket.

If forced to bail out, crews of tanks with protected ammunition are far more confident when it comes to remounting their vehicle quickly.

Tanks with Protected Ammo re-roll all failed Motivation Tests to Remount Bailed Out vehicles in the Starting Step (see page 102 of the main rulebook).  

The Production model Henschel Tiger I E had 100mm of front armour on both its hull and turret, 80mm on its rear and sides, and 25mm of top armour. None of the armour was particularly well sloped, but it had lots of it. It 8.8cm gun had already proved itself in combat as a lethal anti-armour weapon.  
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Wide Tracks
Some excellent tank designs have successfully utilised wider tracks, allowing them to cross almost any terrain.


If a vehicle with Wide Tracks becomes Bogged Down while attempting to cross Rough Terrain, roll again. On a roll of 4+ the vehicle immediately frees itself and continues moving.
  
The first Tigers issued went to the newly assembled men of 502. Schwere Panzerabteilung, who were quickly sent to the Leningrad front in August 1942. Tigers also made an appearance in North Africa in late 1942, much to the disturbance of the allied soldiers who ran into them, many of the legends surrounding the Tiger spring from these first encounters.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Slow Traverse
Most tanks were either fitted with power traverse or had turrets that were light enough to be quickly swung by hand. Some designs suffered from heavy turrets lacking power traverse.


Tanks with slow traverse add +1 to the score required to hit when shooting any turret-mounted weapon except an AA MG at targets that are entirely behind a line drawn across the front of the tank’s turret before they rotate their turret to face the target.
The Tigers of the SS Divisions and Grossdeutschland also made their impact felt during the Battle of Kursk, taking a terrible toll on the once mighty T-34, now equalled by the up-gunned Panzer IV and by far outranked by the Panther and Tiger.  

The Tiger underwent a few of upgrades during its life; in July 1943 the cupola was changed to a new design with periscopes and a rotating hatch similar to the Panther. May 1943 saw the introduction of a new engine to improved performance, and in January 1944 a new road wheel was introduced.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
The Tiger I E success as a design can be marked by its continued destructive use in the hand of aces like Michael Wittmann and Otto Carius right until the end of the war.

Designed by Will Jayne
Painted by Blake Coster
The Tiger I E on the Tabletop
Tiger I E Platoon (GBX90)

The Contents of the Tiger I E Platoon Box Set
Contact the customer service team at [email protected] if you have issues with any components.  
Plastic Tiger I E Sprues (x5)
 Tiger I E Platoon (GBX90)
Tank Commander Sprue (x1) Decal Sheet (x1)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)

Limited Edition Tigers Marsch Bonus Content
Printed Objective Markers (x2)
 Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Decal Sheet (x1) Tiger I TANKS Card (x3)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Michael Wittmann TANKS Card (x1) Otto Carius TANKS Card (x1)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Kurt Knispel TANKS Card (x1) Determined Driver TANKS Card (x1)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Clever Hans TANKS Card (x1) Schürzen TANKS Card (x1)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)

Assembling The Tiger I E Platoon
Blake demonstrates how to assemble the plastic Tiger I E.

Step 1. Start by attaching the tracks the bottom hull section. Step 2. Next, attach the hull rear plate to the back of the lower hull.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Step 3. Attach the lower front hull section to the front of the hull... Step 4. ...followed by the top front hull section. Step 5. Attach the front glacis plate to the top deck of the hull.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Step 6. Next, attach the hull side to the top deck of the hull.
Tiger I E Platoon (GBX90)
Step 8. Next, attach the completed top hull section to the bottom hull. Step 9. Time for the turret. begin by joining the top and bottom turret sections.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Step 10. Next, attach the rear stowage bin. Step 11. Followed by the gun mantlet,
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Step 12. Attach the main gun to the gun mantlet Step 13. Next, attach the spare track links to the sides of the turret.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Below: The plastic sprue includes both an open and closed version of the cupola.
Tiger I E Platoon (GBX90)
Step 14. Attach the cupola of choice to the top of the turret. Step 15. Next, add a Tank Commander if using the open cupola.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Below: The plastic sprue also includes an undamaged and damaged set of the side skirts.
Tiger I E Platoon (GBX90)
Step 16. Attach the side skirts to each side of the hull. Step 17. Finally, attach the hull machine-gun to the glacis plate.
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90)
Adding Rare Earth Magnets
Alternatively, you may choose to glue rare earth magnets into the recess in the hull and to the bottom of the turret. Magnets are a quick and secure way of fixing your turrets to the hulls, as an alternative to the included plastic peg.

Rare Earth Magnets (XX105) are available through the online store here...

Rare Earth Magnets (XX105)
Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90) Tiger I E Platoon (GBX90) Read Chris' guide to Rare Earth Magnets here for more tips and tricks...
Below: With the hull machine-gun in place, the Tiger I E is now fully assembled.
Tiger I E Platoon (GBX90)


Last Updated On Friday, February 22, 2019